|
|
|
Spotlights |
|
|
|
|
|
R-t SJH150C Spotlight |
|
|
|
  
Enlarge image
|
|
A durable and compact floodlight. Its casing is made of cast aluminum. An asymmetrical reflector made of anodized sheet aluminum forms a light beam of middle width. These are usually used for lighting outdoor advertisements and banners, as well as architectural illumination of building fronts etc. Are easy and comfortable in installation and servicing. Are best fit for use with 70-150Watts metal halide lamps (Rx7s). Security class IP 65.
|
|
|
|
|
|
R-t 302, R-t 308, R-t 333, R-t 381 Spotlights |
|
|
|
Enlarge image
|
|
A modern spotlight with built-in controls.
The casing is made of cast aluminum. The disperser is made of heat-resistant and shockproof glass. Also has a silicon compressor. The reflector is made of anodized sheet aluminum. Coated with polyester dust dry paint. All outer bolts and nuts are made of stainless steel. Are usually used for lighting car parks, factories, building fronts etc.
R-t 302-G - is best fit for use with 70-150Watts metal halide lamps (Rx7s).
Type of reflector: symmetrical. Security class IP 65.
R-t 333-G - is best fit for use with 250-400Watts metal halide or sodium-vapor lamps (E40).
Type of reflector: symmetrical/ asymmetrical. Security class IP 65.
R-t 381-G - is best fit for use with 70-150Watts metal halide lamps (Rx7s).
Type of reflector: symmetrical/ asymmetrical. Security class IP 65.
R-t 308-G - is best fit for use with 70-150Watts metal halide lamps (Rx7s).
Type of reflector: circular symmetrical. Security class IP 65.
|
|
|
|
|
|
Lumina Spotlight |
|
|
|
Enlarge image
|
|
A modern spotlight with built-in controls.
Is designed for architectural illumination of building fronts. The casing is made of cast aluminum alloy, installation crampon is made of steel. Coating: polyester dust dry.
All outer bolts and nuts are made of stainless steel. The disperser is made of heat-resistant and shockproof glass. Also has a silicon compressor. The reflector is made of anodized sheet aluminum. Type of reflector: symmetrical/ asymmetrical. Are best fit for use with 70-150Watts metal halide lamps (Rx7s). Security class IP 65.
|
|
|
|
|
|
R-t 412 Spotlight |
|
|
|
Enlarge image
|
|
A modern spotlight with built-in controls.
Are usually used for lighting car parks, factories, building fronts etc. The casing is made of cast aluminum alloy, installation crampon is made of steel. Coating: polyester dust dry.
All outer bolts and nuts are made of stainless steel. The disperser is made of heat-resistant and shockproof glass. Also has a silicon compressor. The reflector is made of anodized sheet aluminum. Type of reflector: symmetrical/ asymmetrical. Are best fit for use with 250-400Watts metal halide lamps (E40). Security class IP 65.
|
|
|
|
|
|
R-t 413 Spotlight |
|
|
|
Enlarge image
|
|
A modern spotlight with built-in controls.
Are usually used for lighting car parks, factories, building fronts etc. The casing is made of cast aluminum alloy, installation crampon is made of steel. Coating: polyester dust dry.
All outer bolts and nuts are made of stainless steel. The disperser is made of heat-resistant and shockproof glass. Also has a silicon compressor. The reflector is made of anodized sheet aluminum. Type of reflector: symmetrical/ asymmetrical. Are best fit for use with 250-400Watts metal halide lamps (E40). Security class IP 65.
|
|
|
|
|
|
Ground lights |
|
|
|
Enlarge image
|
|
Ground lights are usually used outdoors for decorative illumination of plants, statues and monuments, building fronts. They provide good flood lighting. The casing is made of cast extruded aluminum. Glass: shockproof, heat-resistant. The outer decorative cover plate is made of steel. The disperser is made of cast buff aluminum. Security class IP 67.
R-t 608-À type of lamp - metal halide or sodium-vapor – 70Watts (Å27).
R-t 610-À type of lamp - metal halide - 250-400Watts (Å40).
R-t 609-À type of lamp - metal halide - 70Watts (Rs7x).
R-t 626-À type of lamp - metal halide - 70-150Watts (Rx7s).
|
|
|
|
|
|
R-t 22, R-t 99 lights |
|
|
|
Enlarge image
|
|
A bracket light with a strong cast aluminum casing, heat-resistant and shockproof glass, a mirror disperser made of aluminum and a silicon compressor. Are intended for use in outdoor lighting projects, along with project of illumination of highways, wide streets etc. Universal fastenings help install the lights quickly and easily. Due to a few special features are extremely easy in use.
Are best fit for use with 250-400Watts metal halide, sodium or mercury lamps (E40). Security class IP 65.
|
|
|
|
|
|
R-t 80, R-t 88 lights |
|
|
|
Enlarge image
|
|
Small size lights intended for use with gas-discharge lamps. Are usually used indoors, in tunnels (height varies from 3 to 8 meters). The casing and shade are made of steel coated with dust dry paint. The reflector is made of anodized sheet aluminum with high reflecting capacity. Are best fit for use with 250-400Watts metal halide or sodium lamps (E40). Security class IP 65.
|
|
|
|
|
|
R-t 29-400 Spotlight |
|
|
|
Enlarge image
|
|
A light, durable spotlight of concentrated light used with gas-discharge lamps. The casting is made of cast aluminum alloy, coated with polyester dust dry. The reflector is made of anodized buff aluminum and is equipped with circular symmetrical optics, which ensures its high reflecting capacity.
The disperser is made of heat-resistant and shockproof glass. Also has a silicon compressor. These spotlights are designed especially for use in long distance lighting projects. Are best fit for use with 250-400Watts metal halide or sodium lamps (E40). Security class IP 65.
|
|
|
|
|
|
